2026

NEW

2026

NEW

2026

NEW

2026

NEW

2026

NEW

• 5-point harness for work

on wind turbine towers in

humid and salty environments

• 5-point harness for work

on wind turbines

• 5-point harness for work

on towers and antennas

• 4-point harness for work

on towers and antennas

• Easy to use

• Comfortable

• Quick donning and easy adjustments

All contact zones use contoured foam

and are lined with breathable material,

including the shoulder straps,

waistbelt and leg loops, making

it more comfortable to work and

move around.

The dorsal point is equipped with

a fall indicator: if the user takes a

fall on this point, a red indicator

appears to provide a visual warning

that the harness should be retired

immediately.

Two textile slots on the waistbelt

allow a VOLT work seat to easily

be attached for greater comfort

during prolonged work positioning.

The harnesses have a parking system

for the MGO connectors on fall-arrest

lanyards on each shoulder strap.

The VOLT harnesses are easy to don

with feet on the ground. The sternal

point, waistbelt, and leg loops are

equipped with FAST opening buckles

for quick fastening and unfastening.

They are also easy to adjust, with

DOUBLEBACK buckles and anti-slip

devices for long-lasting adjustment.

Harnesses in the VOLT range are designed for workers at height who work on

towers, antennas, and wind turbines. Their design is specific to work positioning.

VOLT

®

LIGHT International Version

Comfortable fall-arrest and work positioning harness. 4 attachment points

The VOLT LIGHT is a fall-arrest and work positioning harness with four attachment points, specifically

designed for work at height professionals who work on towers and metal structures. FAST opening buckles

make it easy to don with feet on the ground and DOUBLEBACK self-locking buckles allow for quick

adjustment. It is designed to be comfortable and supportive for work at height. Equipment loops and tool

holder slots allow the user to organize and carry all the equipment needed for the job at hand.

VOLT

®

International Version

Comfortable fall-arrest and work positioning harness with attachment point for progression

along a vertical rail or cable-based fall protection system. 5 attachment points

The VOLT is a fall-arrest and work positioning harness with five attachment points, specifically designed for

work at height professionals who work on towers and metal structures. FAST opening buckles make it easy to

don with feet on the ground and DOUBLEBACK self-locking buckles allow for quick adjustment. It is designed

to be comfortable, adjustable, and supportive for work at height. The LADDER CLIMB ventral attachment point

can be used to connect a trolley and move along a rail or cable-based fall protection system. Equipment loops

and tool holder slots allow the user to organize and carry all the equipment needed for the job at hand.

VOLT

®

WIND International Version

Comfortable fall-arrest and work positioning harness for wind turbine technicians with

attachment point for progression along a vertical rail or cable-based fall protection system.

5 attachment points

The VOLT WIND is a fall-arrest and work positioning harness with five attachment points, specifically designed

for wind turbine technicians. FAST opening buckles make it easy to don with feet on the ground and

DOUBLEBACK self-locking buckles allow for quick adjustment. It is designed to be comfortable, adjustable,

and supportive for work at height. The LADDER CLIMB ventral attachment point can be used to connect

a trolley and move along a rail or cable-based fall protection system. Protective plates on the back of the

shoulder straps and waistbelt help shield the webbing from friction-induced wear when moving inside a wind

turbine tower. Equipment loops and tool holder slots allow the user to organize and carry all the equipment

needed for the job at hand.

VOLT

®

WIND OFFSHORE

Comfortable fall-arrest and work positioning harness with attachment point for progression

along a vertical rail or cable-based fall protection system, for work on wind turbines in humid

and salty environments. 5 attachment points

The VOLT WIND OFFSHORE is a fall-arrest and work positioning harness with five attachment points,

specifically designed for wind turbine technicians who work in humid and salty environments. FAST opening

buckles make it easy to don with feet on the ground and DOUBLEBACK self-locking buckles allow for quick

adjustment. It is designed to be comfortable, adjustable, and supportive for work at height. The LADDER

CLIMB ventral attachment point can be used to connect a trolley and move along a rail or cable-based fall

protection system. Protective plates on the back of the shoulder straps and waistbelt help shield the webbing

from friction-induced wear when moving inside a wind turbine tower. Equipment loops and tool holder slots

allow the user to organize and carry all the equipment needed for the job at hand.

Accessories

Work Seat for VOLT

®

Seat for work positioning designed for VOLT harnesses (international versions)

Fall-Arrest and Work Positioning Harnesses (International Version)